Product introduction

In the condition of moisture, IONPURE, the antimicrobial layer on the inner wall of the PPR antimicrobial pipe, will slowly release a small amount of silver ions. On the one hand, due to the negative charge on the surface of bacteria, silver ions with positive charge will be adsorbed on the surface of bacteria, thus damaging their electrolyte balance, leading to the death of bacteria due to cell damage. On the other hand, silver ions enter the bacteria, react and combine with the cell enzymes of bacteria, inhibit the activity of bacteria and reproduction of bacteria, and achieve the effect of sterilization.

PPR nano-antibacterial pipe system, with bactericidal and antibacterial effect, can effectively prevent the breeding of bacteria, eliminate common bacteria in water, ensure the sanitation and cleanliness of water in the pipe, is an environment-friendly new plastic pipe.

Product features

1, broad spectrum of high-efficiency antibacterial 99% : strong antibacterial effect, by the national authority testing, longyue PPR antibacterial pipe on escherichia coli, staphylococcus aureus antibacterial rate reached 99.9% above, far more than QB/T 2591-2003 standard antibacterial l level requirements, is the first choice of household plumbing health.

2. Long-term sterilization and anti-mold efficiency: with the use of long-term slow-release inorganic nano-silver antibacterial components, longyue PPR antibacterial pipe can maintain excellent antibacterial and anti-mold performance during the service life of the whole pipe, so as to ensure long-term use and health.

3, stable internal and external characteristics: the use of composite modification of materials and precision co-extrusion technology, internal and external quality is the same, from the appearance to the stability of temperature and pressure resistance properties have maintained the excellent characteristics of longyue PPR pipe.

4, long service life: good toughness, heat resistance and creep resistance, under normal pressure and temperature, service life up to 50 years.

运用范围

1、高档小区直饮水系统管网。

2、饮料、纯净水、矿泉水的输送系统。

3、医院、学校、自来水厂的管道输送系统。 

4、别墅群、宾馆、住宅的饮用水系统。 

5、食品、药品、加工厂的管道输送系统。 

6、高标准水质管道输送系统。

安装步骤

1、切割：切割管材，必须使端面垂直于管轴线。管材切割一般使用管子剪或管道切割机，必要时可使用锋利的钢锯，但切割后管材断面应去除毛边和毛刺。

2、清洁：使用洁净抹布清洁管材和管件的焊接部位（建议用酒精擦拭）、管材与管件连接端面必须清洁、干燥、无油污。 　　

3、划线：按表1规定的熔接深度在管材上划线： 　　

4、加热：热熔机加热后，将管材和管件无旋转地插入热熔模头，管材达到划线位置时停止： 　　

5、焊接：达到加热时间后，管材管件无旋转地拔出，将管材无旋转插入管件承口内，按冷却时间停留。

注意：

同种材质的给水聚丙烯管与管配件之间，应采用热熔连接，安装应使用专用热熔工具。强调暗敷墙体，地坪面层内的管道必须采用热熔连接，不得采用丝扣或法兰连接。

给水聚丙烯管与金属管件连接，应采用带金属嵌件的聚丙烯管件作为过渡，该管件与塑料管采用热熔连接，与金属管件或卫生洁具五金配件采用丝扣连接。另外连接阀门、龙头与金属配件连接时，弯头、三通处要带有固定支座，牢固的固定在墙上。