Product introduction

The inner wall of PPR clean core pipeline is smooth, with low friction coefficient and stronger water permeability. The smooth inner wall can reduce the possibility of internal water pipe to be contaminated, which is one of the advantages of PPR clean core series PPR pipeline. The PPR net core pipeline series PPR pipeline launched this time has a unique ceramic texture of the inner wall, and its inner surface gloss is twice as high as the ordinary PPR pipeline, with a higher degree of smoothness, making household water more smooth and clean.

In order to enable users to enjoy more healthy and safe water quality, clean core series PPR pipe adopts PPR raw materials with high performance at present, so as to achieve continuous and long-term clean pipe wall.

At present, most PPR pipes in circulation on the market have dual use of cold water pipe and hot water pipe, and users need to calculate the length of hot and cold water pipe when choosing. PPR net core series PPR pipes are made of high specification and high standard, and the pipes can be used for hot and cold water, so that users and installers can avoid the trouble when laying pipes.

Product features

1, strict material selection, careful manufacturing, use more assured

2, green shading, not easy to algae, water is more healthy

3, mirror inner wall, not easy to scale, ensure water safety

4, ceramic texture, water resistance is small, more smooth, use more quiet

5. High specification and high standard, common cold and hot water, more convenient to choose

运用范围

1、建筑物的冷热水系统，包括集中供热系统;

2、建筑物内的采暖系统、包括地板、壁板及辐射采暖系统;

3、可直接饮用的纯净水供水系统;

4、中央(集中)空调系统;

5、输送或排放化学介质等工业用管道系统。

6、用于气缸传送的气路等管道系统。

安装步骤

1、切割：切割管材，必须使端面垂直于管轴线。管材切割一般使用管子剪或管道切割机，必要时可使用锋利的钢锯，但切割后管材断面应去除毛边和毛刺。

2、清洁：使用洁净抹布清洁管材和管件的焊接部位（建议用酒精擦拭）、管材与管件连接端面必须清洁、干燥、无油污。

3、划线：按表1规定的熔接深度在管材上划线：

4、加热：热熔机加热后，将管材和管件无旋转地插入热熔模头，管材达到划线位置时停止：

5、焊接：达到加热时间后，管材管件无旋转地拔出，将管材无旋转插入管件承口内，按冷却时间停留。

注意：

同种材质的给水聚丙烯管与管配件之间，应采用热熔连接，安装应使用专用热熔工具。强调暗敷墙体，地坪面层内的管道必须采用热熔连接，不得采用丝扣或法兰连接。

给水聚丙烯管与金属管件连接，应采用带金属嵌件的聚丙烯管件作为过渡，该管件与塑料管采用热熔连接，与金属管件或卫生洁具五金配件采用丝扣连接。另外连接阀门、龙头与金属配件连接时，弯头、三通处要带有固定支座，牢固的固定在墙上。